{"meta":{"version":"2.1","_links":{"self":{"href":"https://api.vam.ac.uk/v2/object/O297630"},"collection_page":{"href":"https://collections.vam.ac.uk/item/O297630/"}},"images":{"_primary_thumbnail":"https://framemark.vam.ac.uk/collections/2014HC8722/full/!100,100/0/default.jpg","_iiif_image":"https://framemark.vam.ac.uk/collections/2014HC8722/","_alt_iiif_image":[],"imageResolution":"high","_images_meta":[{"assetRef":"2014HC8722","copyright":"© Victoria and Albert Museum, London","sensitiveImage":false}]},"see_also":{"_iiif_pres":"https://iiif.vam.ac.uk/collections/O297630/manifest.json","_alt_iiif_pres":[]}},"record":{"systemNumber":"O297630","accessionNumber":"CIRC.181-1914","objectType":"Bed","titles":[],"summaryDescription":"From the mid-19th century onwards there was a great fashion for historic furniture and old oak furniture was particularly highly valued. Pieces of oak furniture were seems as harking back to the glorious Gothic or Tudor periods.  Knowledge of such furniture was not widespread at the time so many pieces of genuinely old furniture were altered or embellished to suit the current idea of such historic periods. Historic panelling was eagerly sought out and that almost always had to be altered to fit a new interior.  T. Crowther &amp; Sons, from whom the Museum acquired this piece, were celebrated dealers in pqnelling and fireplaces but also sold furniture.  The bed was probably made up in their workshops from elements of at least two early beds.  At the time, the Circulation Department of the Museum was actively building up a collection of furniture (largely British) to lend out to museums and art schools round the cournty, to develop knowledge of historic styles among designers and craftsmen. ","physicalDescription":"A tester bed of turned and carved oak, with a panelled headboard of eight panels, set three above two, above three, the footposts turned, carved and with punched decoration.\n\n<u>Design\r\nHeadboard</u>\r\nThe headboard is of framed construction, the front edges of all the framing elements set flush with the front faces of the square posts. \r\nThe PR post appears to be original, with the addition of a newer section scarfed into the outside edge at the foot end (where the area outside the long mortise for the side rail has been lost). The section of the original post below this has now further broken away. The outer edge of the foot face has been worked with a 2 cm wide flush bead moulding, the inner with a similar moulding 1.5 cm wide, but only for the height of the lowest tier of panels. The top of the post is set with a metal spike about 1.2 cm high. The back of the post is very roughly finished. \r\nThe PL post is of elm and appears to be a replacement, modelled on it pair. The base, which has suffered worm damage, is carved in a point flattened at the end. It shows scribe marks at the level of the cross rails. The back of this post is well finished but the inner edge of the foot face is not moulded or carved as on the other post. There was originally a metal spike on the top but this has broken off.\r\nThe posts are joined by four cross rails, the lowest one drilled with six roping holes, approximately 1.7 cm in diameter. These show wear, particularly to the lower edge. The rails and muntins of the headboard are either moulded in the same manner as the posts or chamfered. The muntins show central recessed channels carved with a repeating motif of a horizontal line. On the two upper tiers of the panelling, the frames are scribed 1 cm from the edge and carved with a pattern of inset recesses carved with square balusters. The panels of the upper and lower tier are of plain, quarter-sawn oak, with the grain set vertically.  The panels of the middle tier are set with the grain running horizontally and are carved with vertical fluting. On the back of the headboard, these panels are more heavily chamfered than those on the upper and lower tiers, reflecting the thickness of the timber. \r\n\r\nThe muntins on the headboard and the top rail appear to be replacements. The posts and rails are currently held together with angle-irons but holes drilled through the posts suggest that an earlier method of construction was by bed-screw. On the back of the headboard, there are areas that have broken away and been reinforced with canvas, a dark stain having been added after the repairs.\r\nTester\r\nThe oak tester must have been made in the early 20th century. It is of frame and panel construction with 6 panels, these oddly proportioned with three across the width of the bed and two in the length. All elements of the frame are 11.5 cm wide, except the head rail, which is 13 cm wide. On the underside the stiles, rails and muntins are stop-chamfered and the muntins and centre rail are worked with a broad central rebate. Each of the joints is double-pegged. From the top it is clear that the main section of the tester is of pine, faced with approximately 1 cm of oak. The frieze and cornice are of solid oak, the plain frieze attached to the outside of the tester board with mitred foot corner, the moulded cornice also mitred and applied over the frieze. The lower edges of the frieze are stop-chamfered on their outer faces. The tester is drilled at the four corners to sit over the metal spikes at the top of each post. At either side, towards the head end, there are short (136.5 cm) lengths of modern brass curtain rod of the kind used for light curtains or net curtains. \r\n\r\n<u>Foot posts</u>\r\nThe foot posts were cut originally from a section of timber 5 inches square but have lost dimensions in both directions because of shrinkage. On each the lowest 55 cm (approximately) remains almost square, the top corners chamfered. Above this, for a height of approximately 94 cm the posts are turned and carved with a series of baluster-shaped elements alternating with flat or rounded bun-like, octagonal collars. The balusters show vertical alternating ribs decorated with repeated U-shaped gouge marks and concave sections decorated with star or cross punching or with open circles made by two strikes of a curved-bladed chisel. The uppermost baluster on each is decorated with a chisel with a U-shaped blade approximately 1.5 cm in width but elsewhere a curved blade of 0.7 cm width is used. On the lowest collar of each the outermost edge is decorated with arcading created by the smaller chisel. On the central collars, which are the narrowest point of the posts, the eight sides are decorated with punches of a trellis and a cross. Above the turned area of balusters on each post is another square-sectioned block, 14.5 cm tall, with chamfered lower corners. Screwed into the centres of the top of each block are circular oak sections, 4 cm in diameter and II cm high, out of which protrude iron spikes 2 cm high.  The screws used to attach these appear to be no older than the twentieth century and presumably date from the creation of the tester. \r\nThe inner and head faces of the lower blocks are cut on their outer edges with mortises approximately 30 cm high, 2.3 cm wide and 6 cm deep. This is much larger than required for the tenons of the side rails and the foot rail.  The posts are drilled with several holes for bed screws and show screw marks for later angle irons, with some unexplained holes. The posts show old worming to the base and abrasion. On the PR post there is a large area of loss close to the mortise for the side rail. The upper blocks show numerous old nail or screw holes, presumably relating to the fixing of earlier testers.  The posts show scribe lines indicating the depth of chamfers on the blocks and the cutting lines for the mortises. \r\n\r\n<u>Rails</u>\r\nThese are of oak, slightly and irregularly chamfered on the edges and with a broad tenon cut at each end, approximately 5.5 cm in depth and set back about 1 cm from the foot face, close to the head face on the PR rail, but close to the centre on the PL rail. The tenons have clearly been cut at a later date because they do not follow the natural warping of the rail. Some of the tenons have been reinforced (perhaps at the time that the tester was made) with small slips of hardwood on the inner surfaces. At the foot end, the tenons are drilled to take bed screws but there is no evidence of such fixings at the foot end.  The rails are drilled along the centre line with 9 holes for bed ropes at intervals between 19 and 20 centimetres.  The diameter of the holes is about 1.2 cm and there is evidence of wear from roping. Both show evidence of screws to fix angle irons, although these have been removed in some cases. On the PL rail a small rail of oak, of triangular section, has been attached with hand-made nails to the lower edge of the inside face.  This might have been used to support slats at some time.  The height from the ground to the top of the rails is 51 cm, the height from the ground to the centre of the roping holes is 43 cm.\r\n\r\n<u>Footboard</u>\r\nA rectangular board shaped on the top edge with double scallops between a flat, central section 76 cm wide. The tenons are cut flush with the head face of the board and about 1.6 cm back from the foot face. These broad tenons may originally have been even wider than they are now. Each of them is drilled with at least four holes for bed screws and the ends of the tenons have broken away as a result, particularly on the PL side. The footboard is drilled with two sets of four roping holes approximately 26 cm apart but the outer ones only half that distance from the edges. The upper row, about 14 cm from the top of the board, are of similar diameter to those in the side rails but the lower row, about 23 cm from the top, are 2 cm in diameter.  Neither set shows excessive wear on the outer surface. On the top surface of the footboard are two drilled holes, approximately 2 cm in diameter and 6 cm deep, set about 14 cm from each end of the flat top section of the board. The PR hole has broken away through the front and back surfaces.  The inner surface of the footboard is set with pairs of modern angle irons. There are heavy diagonal shakes in the board and in the centre of the head face there is an area which shows slight cubing as if it had suffered dry rot in the past. \r\n\r\n<u>Condition</u>\r\nThe bed has undergone numerous repairs and may have been made up from elements of at least two different beds. There are a number of holes in the bed posts that suggest no obvious use. The PL post on the back is cut away above the top edge of the bed rail to a depth of 2.5 cm and the lower edge of the cutaway is carved into a neat quarter circle.  The new tester was presumably the work of Crowther’s but the bed block may have been made by the Museum’s Art Workshop.\r\n\n\n","artistMakerPerson":[{"name":{"text":"unknown","id":"A1848"},"association":{"text":"maker","id":"x40240"},"note":""}],"artistMakerOrganisations":[],"artistMakerPeople":[],"materials":[{"text":"oak","id":"AAT12264"}],"techniques":[{"text":"Joinery","id":"x36614"},{"text":"Turning","id":"AAT53158"},{"text":"Carving","id":"AAT53149"},{"text":"Punching","id":"AAT235631"}],"materialsAndTechniques":"Oak, turned and carved","categories":[{"text":"Furniture","id":"THES48948"}],"styles":[],"collectionCode":{"text":"FWK","id":"THES48597"},"images":["2014HC8722"],"imageResolution":"high","galleryLocations":[{"current":{"text":"001","id":"THES341708"},"free":"","case":"","shelf":"","box":""},{"current":{"text":"005","id":"THES344430"},"free":"","case":"","shelf":"","box":""},{"current":{"text":"002","id":"THES342826"},"free":"","case":"","shelf":"","box":""},{"current":{"text":"005","id":"THES344430"},"free":"","case":"","shelf":"","box":""},{"current":{"text":"001","id":"THES341708"},"free":"","case":"","shelf":"","box":""},{"current":{"text":"005","id":"THES344430"},"free":"","case":"","shelf":"","box":""},{"current":{"text":"005","id":"THES344430"},"free":"","case":"","shelf":"","box":""}],"partTypes":[[{"text":"headboard","id":""}],[{"text":"footpost","id":"AAT40445"}],[{"text":"side rail","id":""}],[{"text":"side rail","id":""}],[{"text":"tester","id":""}],[{"text":"footpost","id":""}],[{"text":"footboard","id":""}]],"contentWarnings":[{"apprise":"","note":""},{"apprise":"","note":""},{"apprise":"","note":""},{"apprise":"","note":""},{"apprise":"","note":""},{"apprise":"","note":""},{"apprise":"","note":""},{"apprise":"","note":""}],"placesOfOrigin":[{"place":{"text":"Britain","id":"x32019"},"association":{"text":"made","id":"x28654"},"note":""}],"productionDates":[{"date":{"text":"1600-1630","earliest":"1600-01-01","latest":"1630-12-31"},"association":{"text":"made","id":"x28654"},"note":""}],"associatedObjects":[],"creditLine":"","dimensions":[{"dimension":"Height","value":"178.8","unit":"cm","qualifier":"","date":{"text":"","earliest":null,"latest":null},"part":"","note":""},{"dimension":"Length","value":"194.2","unit":"cm","qualifier":"","date":{"text":"","earliest":null,"latest":null},"part":"","note":""},{"dimension":"Width","value":"139","unit":"cm","qualifier":"","date":{"text":"","earliest":null,"latest":null},"part":"","note":""}],"dimensionsNote":"","marksAndInscriptions":[{"content":"RT","inscriber":{"name":{"text":"","id":""},"association":{"text":"","id":""}},"date":{"text":"","earliest":null,"latest":null},"description":"","interpretation":"","language":"","medium":"","method":"","position":"","script":"","translation":"","transliteration":"","type":"","note":"Stamped on the outer face of the PR footpost at the top of the lower, square-sectioned base. The stamp appears to be more heavily struck at the top of the letters.  Probably not an original maker's mark but the mark of whoever worked on the bed in the late 19th or early 20th century, possibly in the firm of Crowther's, just before the bed was acquired for the Museum. "},{"content":"IIII","inscriber":{"name":{"text":"","id":""},"association":{"text":"","id":""}},"date":{"text":"","earliest":null,"latest":null},"description":"","interpretation":"","language":"","medium":"","method":"","position":"","script":"","translation":"","transliteration":"","type":"","note":"In black paint on PR post, on the inner and head face, close to the mortise for the bed rail. "},{"content":"III","inscriber":{"name":{"text":"","id":""},"association":{"text":"","id":""}},"date":{"text":"","earliest":null,"latest":null},"description":"","interpretation":"","language":"","medium":"","method":"","position":"","script":"","translation":"","transliteration":"","type":"","note":"In black paint on PL post on the inner and head face, close to the mortise for the bed rail."}],"objectHistory":"Acquired for £30 from T. Crowther &amp; Sons, 282 North End Road, Fulham, London (Registered File 14/4726).  At that time the bed was described as 'Pors. mg. [portions missing]. Chipped, worm-eaten in places.' \n\nThe firm of Crowther's was established as a stone-mason's business in the late 19th century but from about 1907, when they moved to North End Road, they were listed in directories as antique dealers, specialising in architectural salvage.  There are very fiew surviving records from Crowther's. In the early years of the firm , papers seem simply not to have been kept and later papers were destroyed, including account books (verbal information from the architectural historian John Harris who said that when Crowther's were on trial in relation to the acquisition of a number of chimney pots they claimed that all account books had been destroyed. A small archive is held by Fulham Public Library. Crowther's, like most dealers in architectural salvage, were accustomed to adapting and making up pieces to suit new settings. \n\nThe bed appears to have been made up from parts of at least two beds. There is disparity between the height of the mortises in the foot posts and the height of the tenons on the rails (even allowing for alteration of these). The existence of two sets of roping holes in the foot rail suggests that this has had to be adapted for use with the side rails. The holes in the top of the foot rail (possibly for bed staves) are not found on the upper faces of the side rails, suggesting that they did not start life together. The decoration of the foot posts is unsophisticated but bold, using both strikes of a curved chisel and to different stamps (stars and crosses) to create a dense surface pattern. None of this surface decoration is found on the headboard and it seems possible that this was originally much plainer, with the central band of arcaded carving being an addition. The tester dates from the 20th century and was possibly the work of the Art Workshop in the Museum, together with the block that takes the place of mattresses and bedding. The top of the foot posts show a number of nail and scres holes randomly across the surfaces.  \n\nOn long loan to Hull Museums for several years.","historicalContext":"","briefDescription":"A tester bed of turned and carved oak, with a panelled headboard of eight panels, the central two panels carved with fluting, the footposts turned and carved with fluted balusters with punched decoration. The panelled tester is modern.","bibliographicReferences":[],"production":"","productionType":{"text":"","id":""},"contentDescription":"","contentPlaces":[],"associatedPlaces":[],"contentPerson":[],"associatedPerson":[],"contentOrganisations":[],"associatedOrganisations":[],"contentPeople":[],"associatedPeople":[],"contentEvents":[],"associatedEvents":[],"contentOthers":[],"contentConcepts":[],"contentLiteraryRefs":[],"galleryLabels":[],"partNumbers":["CIRC.181-1914","CIRC.181A-1914","CIRC.181B-1914","CIRC.181C-1914","CIRC.181D-1914","CIRC.181E-1914","CIRC.181F-1914"],"accessionNumberNum":"181","accessionNumberPrefix":"CIRC","accessionYear":1914,"otherNumbers":[],"copyNumber":"","aspects":["WHOLE","headboard","footpost [1]","side rail [1]","side rail [2]","tester","footpost [2]","footboard"],"assets":[],"recordModificationDate":"2025-04-22","recordCreationDate":"2009-06-24","availableToBook":true}}